FOUR WINDS INTERNATIONAL Chateau, Руководство пользователя

Страница: 76 / 146

FOUR WINDS INTERNATIONAL
In the event of power loss or awning motor failure the Automatic Patio Awning can be
retracted as explained below. If you do not feel comfortable performing this procedure,
contact the nearest authorized service center for assistance. Do not drive the recreation
vehicle with the awning in the extended position.
Extend:
• Press and hold the remote switch (located on the front of the passenger arm
rest) in the extend position until the awning is fully open or utilize the remote
control.
NOTE: Do not press more than one “EXTEND” button at the same time. Awning will not work
and/or may cause control box fuse to blow.
Retract:
• Press and hold the remote switch in the retract position. When awning is fully
closed release the switch.
NOTE: Do not press more than one “RETRACT” button at the same time. Awning will not work
and/or may cause control box fuse to blow.
The awning must be serviced by a Dometic Service Center or a qualified service technician
before attempting to open the awning after this procedure has been performed.
Manually Closing the Automatic Awning:
• Two people will be needed to perform this
procedure.
• Slide the provided pull strap into the utility
slot of the Fabric Roller Tube Assembly.
• Make sure that one person is securely
holding onto the pull strap, while the other
person removes the bolt in the top of the
right top casting. Once the bolt is removed
the FRTA will want to roll in on its own.
This is why it is very important to hold the
strap securely.
• While holding the strap, let the FRTA slowly
retract until it is in the closed position.
• Once the awning is in the closed position,
align the hole where the bolt was removed
and reinstall to secure the awning. The bolt
must be reinstalled to prevent the awning
from opening during travel.
Exterior Controls & Operations
5-5
Automatic Patio Awning