FOUR WINDS INTERNATIONAL
16. A primary concern when winterizing the recreation vehicle is to make sure the water
systems are protected against damage caused by freezing. Follow the water system
winterizing procedure outlined in the Water and Drainage section of this manual (check the
Index for location).
NOTE:
Be sure to read the rest of this manual, and follow any additional information on storage,
cleaning, and winterizing procedures.
Molds are microscopic organisms that naturally occur in virtually every environment, indoors and
out. Outdoors, mold growth is important in the decomposition of plants. Indoors, mold growth is
unfavorable. Left unchecked, molds break down natural materials, such as wood products and
fabric. Knowing the potential risks is important for an owner to protect their
investment.
For mold growth to occur, temperatures, indoor or outdoors, must be between 40 degrees and 100
degrees Fahrenheit and also have a source of moisture, such as humidity, standing water, damp
materials, etc. Indoors, the most rapid growth occurs with warm and humid conditions.
By controlling relative humidity, the growth of mold and mildew can be inhibited. In warm
climates, use of the air conditioner will reduce the relative humidity. Vents are located in the bathing
and cooking areas and constant use is advised during food preparation and bathing, even during
colder weather. Additionally, opening a window during these activities will assist in ventilation. In
extremely humid conditions, the use of a dehumidifier can be helpful.
NOTE:
If using a dehumidifier, please read and follow all manufacturer instructions and
recommendations to the use and cleaning of the dehumidifier.
Ideally, relative humidity should be at 60% or less. Relative humidity can be monitored
utilizing a portable hygrometer, a small device that measures temperature and relative
humidity. Hygrometer’s are available at electronics or building supply stores for minimal cost.
NOTE:
In cold climates, relative humidity may need to be at 35% or less to avoid window
condensation.
Frequent use of the recreation vehicle or cleaning regularly is an important preventive measure.
Further, any spills should be wiped up quickly and dried as soon as possible. Avoid leaving damp
items lying about. On safe surfaces, use mold or mildew killing cleaning products.
Check sealants regularly, and reseal when necessary to avoid water leaks. Proper preventive
maintenance to the recreation vehicle and its accessories, as described both in this manual and in
accompanying literature, will provide the best protection to the recreation vehicle.
Care & Maintenance
10-13
MOLD
What Factors Contribute to Mold Growth?
How can Mold Growth be Inhibited?
Содержание Chateau
