FOUR WINDS INTERNATIONAL Chateau, Руководство пользователя

Страница: 139 / 146

FOUR WINDS INTERNATIONAL
During those periods when the recreation vehicle is not in use, care must be taken to ensure
moisture sources are addressed. Ideal storage of the recreation vehicle would be in an enclosed
climate controlled environment. When this is not possible, the following steps should be taken to
ensure moisture is controlled:
• Turn off all water sources.
• Turn off all combustion appliances.
• Drain the water tank(s).
• Drain the water heater.
• Open all closets, cabinet doors and drawers.
• Close all windows and entrance doors.
• Open a vent enough to allow for some limited ventilation air flow, but not so far as to
allow snow or rain to enter.
• When storing the recreation vehicle high humidity climates (ambient relative humidity is
greater than 60% year round), add a dehumidifier drained to the exterior to control
humidity inside the recreation vehicle during storage.
Areas that are exposed to water spills or leaks should be dried as soon as possible and
definitely within 24-48 hours. Drying areas quickly minimizes the chance for moisture damage and
possible mold growth, which can begin to form colonies in 48 hours. A variety of methods can be
used to help the drying process:
• Remove excess water with an extraction vacuum.
• Use a dehumidifier to air drying.
• Use portable fans to move air across the surface.
• Because moisture is key to mold issues, treat all signs of condensation and spills
seriously and deal with promptly. Failure to deal with a moisture issue promptly may
cause more severe issues where none initially existed, or may make a small problem
much worse.
• Learn to recognize signs of mold - don’t paint over or cover up suspicious
discoloration until you are sure it is not mold. The affected surface must first be cleaned
and dried; residual staining may be painted.
• Be sure to understand and eliminate the source of moisture accumulation as a part of
the clean-up. Otherwise, the same issues will simply reoccur; and
• Small amounts of mold should be cleaned as soon as it appears. Small areas of mold
should be cleaned using a detergent/soapy solution or an appropriate household
cleaner. Gloves should be worn during cleaning. The cleaned area should then be
thoroughly dried. Dispose of any sponges or rags used to clean mold.
Care & Maintenance
10-16
Storage of the Recreation Vehicle