Detailed description of assembly and installation
STF tripod – basic information:
•
Load capacity provided by the
manufacturer is 40 kg max.,
•
Spacing of legs from the tripod axis is 75
cm min.,
•
The tripod contains a spreader which
secures the legs from further spacing in the
event of pressure on the tripod.
The tripod (Fig. 3) should be set up and secured
from accidental collapse. The column should be
extended according to one’s needs, blocked with
the pin and secured with a knob.
The jib is installed on the tripod by joining them with the Cone Click system. Make sure
that the cones of the quick connector are properly fitted, then block them by tightening
the knob (Fig. 4 and 5).
Attention!
The knob must be tightly fixed without any clearance between elements.
Next, untighten the four knobs at the top and two
knobs at the bottom (Fig. 6) and extend the
elements of the device as far as they will go (two
arms and a moveable grip of the head).
The extended jib should be secured by tightening
all the above-mentioned knobs back.
In order to calculate the appropriate mass of
counterweights, multiply the complete weight of
the registering device with the mounted
accessories by the value of about 3.
7
Fig. 4
Fig. 5
Fig. 6
Fig. 3
