The grip may be regulated in all planes. In order to mount the monitor, use the quick
connector at the end of the grip for safe and easy assembly.
The crane is equipped with regulation grips with Velcro which allows you to keep the
cables in order and secure them. Turn the grip by 90 degrees, move to a desired place
and block by turning the grip by 90 degrees again (Fig. 19).
At the side of the device, there is a knob for blocking the turn of the jib in the horizontal
plane (Fig. 20). Use the blockage only to secure the arm in a given position. Remember to
free the blockage before changing the position of the arm.
Disassembly of the jib
In order to disassemble the jib, reverse the order of assembly. Remember to tighten all
knobs after disassembly to avoid an accidental and dangerous situation when the
elements can draw apart.
Transportation
The set is small in size after disassembly, which allows for easy transportation in the trunk
or at the backseat of the car. Remember to place the crane in the car securely. Consider
the inert forces while braking and other road incidents.
Conservation and maintenance of the crane
The device demands no special conservation apart from keeping it clean. Check the
condition of the elements such as knobs, weight grips, screw connections, etc. In case of
any abnormalities in the form of cracks, deformation or damage of the elements stop the
operation immediately and contact our maintenance service.
11
Fig. 19
Fig. 20
