Setting up the crane
1. The tripod should be spaced widely enough,
so that it could stand on its legs instead of wheels.
2. The jib is installed on the tripod in vertical
position (at the right angle to the tripod’s axis).
3. The tilt brakes should be blocked.
4. Extend the two top profiles of the jib.
5. Mount the neck with the first 2.5 kg weight.
6. Extend the third profile.
7. Mount another 2.5 kg weight.
8. Install the flexing wire.
9. Install the leveling wire.
10. Install the Koliber head.
11. Mount the next 2.5 kg weight.
12. Install the camera.
13. Balance with the next weight.
14. Use the sliding weight to balance precisely.
6
