Foss EyeFoss Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 84

Foss EyeFoss Скачать руководство пользователя страница 13

User Manual 6007 2981 / Rev. 10

2:1

2

Introduction

2.1

General

This manual will take you through the routine operation of the EyeFoss™ instrument
and its functions. It will also give guidance for the routine maintenance to secure
accurate analysis and ensure a long instrument life.

2.2

Image Analysis

During the growth period and harvest grain is affected by factors such as weather,
soil, growth location, harvest conditions, fungi, insects etc. These factors have an
influence on the quality and the properties of the grain such as the visual appearance,
the number of damaged kernels, the taste and the baking characteristics. Historically,
evaluation of grain appearance has been done by the only tool available - the human
eye. Combined with various accessories such as sieves and scales, this has provided
information for different grading methods.

An accurate and consistent visual inspection and a correct and objective evaluation
require long experience as well as a deep knowledge. Because of that, the grain
industry has awaited a product that is able to perform reliable grain inspections in a
consistent, rapid, cost-effective and objective way. EyeFoss is a flexible image
analysis instrument for objective automated inspection and classification of grains
that fulfils all of these criteria.

Intended Use

EyeFoss is an image analysis instrument for inspection of different characteristics in
grain, such as size, shape, health etc. with high accuracy. There is no need for sample
preparation or cleaning before running the analysis. An image analysis is operated
through the software program Foss Integrator™, where the images and results of the
kernel sample are displayed.

«
...
11
12
13
14
15
...
»

Содержание EyeFoss





















































































Отзывы:

Нет отзывов