Fortress Technologies ES210 страница 212 Скачать руководство пользователя

Страница: 212 / 242

Bridge GUI Guide: Maintenance

197

NOTE:

The back-

up file used to re-

store the Bridge con-
figuration

must

have

been made on the cur-
rent or another Bridge

of the same model

. You

cannot restore from a
backup file created on a
different Fortress Bridge
model.

Most Bridge configuration settings are saved to the backup file.
The only exceptions are the Bridge’s

System Time

and

System

Date

settings (

Configure

Administration

Time

Configuration

). When you restore from the backup file, the rest

of the settings in the current configuration are overwritten by
those in the backup file.

Fortress Technologies recommends backing up the Bridge
configuration:



when the Bridge is first set up



immediately before configuration changes are made



after changes are made and the new configuration has
been tested and proved fully operational

You can also use the restore function to reconfigure a Bridge
using a backup file created on a different Bridge.

Figure 6.5.

Backup System Settings

frame, all platforms

To back up the Bridge configuration:

NOTE:

Backup file

passwords must

be a minimum of ten al-
phanumeric characters.
Strong passwords con-
tain a mix of upper and
lower cases.

Log on to the Bridge GUI through an

Administrator

-level

account and select

Maintain

System

from the menu on

the left.

In the

System

screen’s

Backup System Settings

frame,

optionally enter a

Backup System Password

, or leave the

field empty to apply a default password.

You do not need to

know the default password to restore from a file that uses it.
Leave the password field empty during the restore
operation, and the default will again be applied
transparently.

If you created a non-default password for the backup file,
record it in a secure place; you will need it to restore from
the backup file.

Click

EXECUTE

. The standard browser dialog asks whether

you want to open or save the file (if the .cfg file type is not
yet associated with an application, IE7 presents options to
find or save it).

Save

the file with the name and in the

location of your choice.

The default backup filename is

configuration-backup.cfg

Содержание ES210



















































































































































































































































Результаты поиска

Содержание ES210

Отзывы:

Похожие инструкции для ES210

Бренды по названию

Популярные бренды

Fortress Technologies ES210, Руководство пользователя

Результаты поиска

Содержание ES210

Отзывы:

Похожие инструкции для ES210

Бренды по названию

Популярные бренды