Fortinet FortiSwitch-548B v. 5.2.0.2 Скачать руководство пользователя страница 48

Страница: 48 / 969

- 48 -

Maximum VLAN Entries:

The maximum number of Virtual LANs (VLANs) allowed on this switch.

Most VLAN Entries Ever Used:

The largest number of VLANs that have been active on this switch

since the last reboot.

Static VLAN Entries:

The number of presently active VLAN entries on this switch that have been

created statically.

Dynamic VLAN Entries:

The number of presently active VLAN entries on this switch that have been

created by GVRP registration.

VLAN Deletes:

The number of VLANs on this switch that have been created and then deleted since

the last reboot.

Time Since Counters Last Cleared:

The elapsed time, in days, hours, minutes, and seconds, since

the statistics for this switch were last cleared.

7.2.1.3 show interface switch

This command displays a summary of statistics for all CPU traffic.

Syntax

show interface switch

Default Setting

None

Command Mode

Privileged Exec

Display Message

Broadcast Packets Received:

The total number of packets received that were directed to the

broadcast address. Note that this does not include multicast packets.

Packets Received With Error:

The number of inbound packets that contained errors preventing

them from being deliverable to a higher-layer protocol.

Packets Transmitted Without Error:

The total number of packets transmitted out of the interface.

Broadcast Packets Transmitted:

The total number of packets that higher-level protocols requested

to be transmitted to the Broadcast address, including those that were discarded or not sent.

Transmit Packet Errors:

The number of outbound packets that could not be transmitted because of

errors.

Address Entries Currently In Use:

The total number of Forwarding Database Address Table

entries now active on the switch, including learned and static entries.

VLAN Entries Currently In Use:

The number of VLAN entries presently occupying the VLAN table.

Time Since Counters Last Cleared:

The elapsed time, in days, hours, minutes, and seconds since

the statistics for this switch were last cleared.

Содержание FortiSwitch-548B v. 5.2.0.2










































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание FortiSwitch-548B v. 5.2.0.2

Отзывы:

Похожие инструкции для FortiSwitch-548B v. 5.2.0.2

Бренды по названию

Популярные бренды

Fortinet FortiSwitch-548B v. 5.2.0.2, Руководство администратора

Результаты поиска

Содержание FortiSwitch-548B v. 5.2.0.2

Отзывы:

Похожие инструкции для FortiSwitch-548B v. 5.2.0.2

Бренды по названию

Популярные бренды