Hardware Install Guide for FortiScan
28
Figure 22:
Moving the CMA away from the CMA tray
To cable the system using the CMA
1
Using the tie wraps provided, bundle the cables together as they enter and exit the
baskets so they do not interfere with adjacent systems (1).
2
With the CMA in the service position, route the cable bundle through the inner and
outer baskets (2).
3
Use the pre-installed Velcro straps on either end of the baskets to secure the cables
(3).
4
Adjust the cable slack as needed at the hinge position (4).
1
2
Caution:
To avoid potential damage from protruding cables, secure any slack in
the status indicator cable before routing this cable through the CMA.
