Hardware Install Guide for FortiScan
13
To engage and release the slam latch
1
Facing the front, locate the slam latch on either side of the system (1).
Figure 5:
Engaging and releasing the slam latch
2
The latches engage automatically as the system is pushed into the rack and are
released by pulling up on the latches (2).
3
To secure the system for shipment in the rack or for other unstable environments,
locate the hard-mount screw under each latch and tighten each screw with a #2 Phillips
screwdriver (3).
To install the CMA attachment brackets
1
Locate the CMA attachment bracket marked A and install it at the back of the slide rail
marked with a corresponding A (1).
1
2
3