Fortinet FortiScan-1000C, Инструкция по установке

Страница: 15 / 33

Hardware Install Guide for FortiScan 15
http://docs.fortinet.com/
•
Document feedback
2 Thread the Velcro straps through the tooled slots on the outer or inner CMA brackets
on each side of the system to secure the cable bundles (2).
Removing the system from the rack
To remove the system from the rack
1 Pull the system out of the rack until the sliding rails lock into place (1).
Figure 8: Removing the system from the rack
2 Locate the white tabs (2) on the sides of the chassis rail members (1).
3 Pull the tabs towards the front of the system to release the chassis rail members from
the rails. Continue pulling the system until the chassis rail members are completely
clear of the rails and place the system on a level surface (3).
Installing the cable management arm
The FortiScan-1000C comes with a cable management arm (CMA). Use the instructions
below to install the CMA.
1
2
3
Caution: Only trained service technicians are authorized to remove the system
cover and access any of the components inside the system. Before you begin,
review the safety instructions that came with the system.