Hardware Install Guide for FortiScan
21
3
Seat each end piece in the front holes of the vertical rack flanges (3).
Figure 14:
Installing and removing the rails (square-hole racks)
4
Align each end piece to seat the pegs in the top and bottom holes of the first U (4).
5
Engage the back end of the rail until it fully seats on the vertical rack flange and the
second “tooth” on the latch locks in place. Repeat these steps to position and seat the
front end piece on the vertical flange (5).
6
To remove the rails, pull on the latch release button on the end piece midpoint and
unseat each rail (6).
To install in round-hole racks
1
Position the left and right rail end pieces of the rail module labeled FRONT facing
inward.
3
6
5
4
