background image

Fortinet documentation

Introduction

FortiManager-1000C™ Version 4.0 Rack and Hardware Install Guide

4

02-40000-112634-20091026

http://docs.fortinet.com/

 • 

Feedback

You can dramatically improve the time that it takes to resolve your technical support ticket 
by providing your configuration file, a network diagram, and other specific information. For 
a list of required information, see the Fortinet Knowledge Center articl

What does 

Fortinet Technical Support require in order to best assist the customer?

Fortinet documentation 

The Fortinet Technical Documentation web site, 

http://docs.fortinet.com

, provides the 

most up-to-date versions of Fortinet publications, as well as additional technical 
documentation such as technical notes.

In addition to the Fortinet Technical Documentation web site, you can find Fortinet 
technical documentation on the Fortinet Tools and Documentation CD, and on the Fortinet 
Knowledge Center.

Fortinet Tools and Documentation CD

Many Fortinet publications are available on the Fortinet Tools and Documentation CD 
shipped with your Fortinet product. The documents on this CD are current at shipping 
time. For current versions of Fortinet documentation, visit the Fortinet Technical 
Documentation web site

http://docs.fortinet.com

.

Fortinet Knowledge Center 

The Fortinet Knowledge Center provides additional Fortinet technical documentation, 
such as troubleshooting and how-to-articles, examples, FAQs, technical notes, a glossary, 
and more. Visit the Fortinet Knowledge Center at 

http://kb.fortinet.com

.

Comments on Fortinet technical documentation 

Please send information about any errors or omissions in this or any Fortinet technical 
document to 

[email protected]

.

Conventions

Fortinet technical documentation uses the conventions described below.

IP addresses

To avoid publication of public IP addresses that belong to Fortinet or any other 
organization, the IP addresses used in Fortinet technical documentation are fictional and 
follow the documentation guidelines specific to Fortinet. The addresses used are from the 
private IP address ranges defined in RFC 1918: Address Allocation for Private Internets, 
available at 

http://ietf.org/rfc/rfc1918.txt?number-1918

.

CLI constraints

CLI constraints, such as 

<address_ipv4>

, indicate which data types or string patterns 

are acceptable input for a given parameter or variable value. CLI constraint conventions 
are described in the CLI Reference document for each product.

Notes, Tips and Cautions

Fortinet technical documentation uses the following guidance and styles for notes, tips 
and cautions.

Содержание FortiManager-1000C

































Отзывы: