Fortinet FortiGate 1000A, Руководство администратора

Страница: 201 / 412

Router CLI configuration
FortiGate-1000A/FA2 Administration Guide 01-28011-0254-20051115
201
config router ospf
config summary-address
edit 5
set prefix 10.0.0.0 255.0.0.0
end
end
This example shows how to display the OSPF settings.
get router ospf
This example shows how to display the OSPF configuration.
show router ospf
config router static6
Use this command to add, edit, or delete static routes for IPv6 traffic. Add static routes
to control the destination of traffic exiting the FortiGate unit. You configure routes by
adding destination IP addresses and netmasks and adding gateways for these
destination addresses. The gateways are the next hop routers to which to route traffic
that matches the destination addresses in the route.
The FortiGate unit assigns routes using a best match algorithm. To select a route for a
packet, the FortiGate unit searches through the routing table for a route that best
matches the destination address of the packet. If a match is not found, the FortiGate
unit routes the packet using the default route.
Command syntax pattern
config router static6
edit <sequence_integer>
set <keyword> <variable>
end
config router static6
edit <sequence_integer>
unset <keyword>
end
config router static6
delete <sequence_integer>
end
get router static6 [<sequence_integer>]
show router static6 [<sequence_integer>]