Fortinet FortiGate 1000A Скачать руководство пользователя страница 166

Страница: 166 / 412

166

01-28011-0254-20051115

Fortinet Inc.

RIP

Router

Distribute list options

Figure 70: RIP Distribute list configuration

To configure a distribute list

Go to

Router > RIP > Distribute List

Select Create New to add a new distribute list or select the edit icon beside an existing
distribute list to edit that distribute list.

Set Direction to In or Out.

Select either prefix-list or access-list.

Select the prefix list or access list to use for this distribute list.

Select an interface to apply this distribute list to, or select the blank entry to apply this
distribute list to all interfaces.

Select or clear the Enable check box to enable or disable this distribute list.

Select OK.

Create New

Add a new distribute list.

Direction

The direction for the filter.

Filter

The type of filter and the filter name.

Interface

The interface to use this filter on. If no interface name is displayed, this

distribute list is used for all interfaces.

Enable

The status of this distribute list.

Delete and Edit
icons

Delete or edit a RIP distribute list.

Direction

Set the direction for the filter. Select In to filter incoming packets. Select

Out to filter outgoing packets.

prefix-list

Select prefix-list to use a prefix list for this distribute list. Select the name

of the prefix list to use for this distribute list.

access-list

Select access-list to use an access list for this distribute list. Select the

name of the access list to use for this distribute list.

Interface

Select the name of the interface to apply this distribute list to. If you do

not specify an interface, this distribute list will be used for all interfaces.

Enable

Select Enable to enable the distribute list.

Содержание FortiGate 1000A





























































































































































































































































































































































































































Результаты поиска

Содержание FortiGate 1000A

Отзывы:

Бренды по названию

Популярные бренды

Fortinet FortiGate 1000A, Руководство администратора

Результаты поиска

Содержание FortiGate 1000A

Отзывы:

Бренды по названию

Популярные бренды