Fortinet FortiGate 1000A, Руководство администратора

Страница: 200 / 412

200
01-28011-0254-20051115 Fortinet Inc.
CLI configuration Router
This example shows how to display the OSPF configuration.
show router ospf
config summary-address
Access the
config summary-address
subcommand using the
config router
ospf
command.
Use this command to summarize external routes for redistribution into OSPF. This
command works only for summarizing external routes on an Autonomous System
Boundary Router (ASBR). For information on summarization between areas, see
“config range” on page 185 . By replacing the LSAs for each route with one aggregate
route, you reduce the size of the OSPF link-state database.
config summary-address command syntax pattern
config summary-address
edit <id_integer>
set <keyword> <variable>
end
config summary-address
edit <id_integer>>
unset <keyword>
end
config summary-address
delete <id_integer>
end
get router ospf
show router ospf
Example
This example shows how to summarize routes using the prefix 10.0.0.0 255.0.0.0.
Note: Only the
prefix
keyword is required. All other keywords are optional.
summary-address command keywords and variables
Keywords and
variables Description Default Availability
advertise
{disable | enable}
Advertise or suppress the summary route
that matches the specified prefix.
enable
All models.
prefix
<address_ipv4mask>
Enter the prefix (IP address and netmask)
to use for the summary route. The prefix
0.0.0.0 0.0.0.0
is not allowed.
0.0.0.0
0.0.0.0
All models.
tag <tag_integer>
Specify a tag for the summary route.
The valid range for
tag_integer
is 0 to
4294967295.
0 All models.