Fortinet FortiGate 1000A, Руководство администратора

Страница: 167 / 412

Router RIP
FortiGate-1000A/FA2 Administration Guide 01-28011-0254-20051115
167
Offset list
Use offset lists to add the specified offset to the metric of a route.
Figure 71: RIP Offset list
Offset list options
Figure 72: RIP Offset list configuration
To configure an offset list
1 Go to Router > RIP > Offset List .
Note: By default, all offset lists for the root virtual domain are displayed. If you create additional
virtual domains, the offset lists belonging to the current virtual domain only are displayed. To
view the settings associated with a different virtual domain, go to System > Virtual Domain >
Virtual Domains and select the virtual domain.
Create New Add a new offset list.
Direction The direction for the offset list.
Access-list The access list to use for this offset list.
Offset The offset number to add to the metric for this offset list.
Interface The interface to match for this offset list.
Enable The status of this offset list.
Delete and Edit
icons Delete or edit a RIP offset list.
Direction Select In to apply the offset to the metrics of incoming routes. Select out
to apply the offset to the metrics of outgoing routes.
Access-list Select the access list to use for this offset list. The access list is used to
determine which routes to add the metric to.
Offset Enter the offset number to add to the metric. Enter a number from 1 to 16.
Interface Select the interface to match for this offset list.
Enable Select Enable to enable this offset list.