Fortinet FIM-7904E, Руководство пользователя

Страница: 15 / 27

Hardware installation Inserting a FIM-7904E module into a chassis
5. Tighten both retention screws to secure the module in the chassis.
You can tighten the retention screws by hand with a Phillips screwdriver. If you use a power screwdriver the
tightening torque needs to be adjusted between 3 In-lb to 4 In-lb (0.4 N-m to 0.48 N-m).
As the latches are locked, power is supplied to the module. If the chassis is powered on during insertion the status
LED flashes green as the module starts up. Once the module has started up and is operating correctly, the front
panel LEDs are lit for normal operation.
Normal LED operation
LED State
Status Green
Alarm Off
HA Off
Power Green
FIM-7904E Interface Module Guide
Fortinet Technologies Inc. 15