1.8 For Products with a Water Dispenser/Ice Machine
• Operating pressure for cold water inlet is between 1-5.5 bars.
If the water pressure exceeds 80 psi (5.5 bars), install a pressure limiting
valve to your mains system.
• If the mains pressure is lower than 1 bar, you can use an auxiliary pump
to compensate the low pressure.
• If you do not know how to check the water pressure,
please consult a professional plumber.
• If there is a risk of water impact in your installation, always use
a water impact protection equipment in that installation.
• Please consult professional plumbers if you are not sure if there is
water impact in your installation.
• Do not make installation on the hot water inlet.
• Take the necessary measures against the freezing risk of the hoses.
• The water temperature operating range must be 0.6
°
C (33
°
F) minimum
and 38
°
C (100
°
F) maximum.
1 Important Instructions Regarding Safety and Environment
C
If the product is damaged and if you see gas leak,
please keep away from the gas. It may cause frostbite
when it gets into contact with the skin. (including R134
C
Ignore this warning if the cooling system of your product
contains R134a.
C
Type of gas used in the product is stated on the type
plate which is on the left wall inside the refrigerator.
A
WARNING:
Never throw the product into fire for disposal.
A
WARNING:
Never connect the product to a cold water mains with a
pressure of 5.5 bars (80 psi) and above
