5 Operating the product
5.8
Crisper compartment
To remove the crisper
- Pull the crisper until it stops.
- Slightly unclip the front section of the drawer and take it out completely.
To install the crisper
- Pull the rails completely.
- Place the gap at the rear corners of the crisper to the detail located
at the rear corners of the rails.
- Push the crisper slowly down until you feel it clip front onto the rails.
C
Make sure that the details at the right and left-hand
sides are fixed when installing the crisper.
C
Never leave the vegetables in their plastic bags in the
crisper. If they are left in their plastic bags they will rot
in a short period of time.
The crisper compartment preserves the humidity of your vegetables,
allowing you to store them for a long time without having to keep
them in their bags.
If you do not prefer the vegetables to get into contact with other vegetables
due to hygienic reasons, you can use perforated paper, foam or a similar
material instead of plastic bags.
While the vegetables are being replaced, their specific weights should be
taken into consideration.
Heavy and hard vegetables must be placed at the bottom of the crisper
and light and soft vegetables must be on the upper part.
Pears, kiwis, tomatoes, cucumbers, apricots, peaches, broccolis, lettuces,
cabbages, parsley and spinach are fruits and vegetables
that emit ethylene gas.
Do not place them into the same crisper with other fruits and vegetables.
The ethylene gas emitted by these foods cause other fruits and vegetables to
ripen sooner and to rot in a shorter span of time.
Do not remove the main body of the crisper from the refrigerator separately
unless you have to do so.
