6
1. Filling with water
Before inserting the plug info the outlet, make sure that
the boiler cap
(1)
is screwed completely.
Fill the tank
(2)
with 2 L (0.52 gal) tap water.
Press the main switch
(3)
.
Now the appliance pumps the water into the boiler.
The appliance is equipped with a warning acoustical
signal that indicates when cold water must be poured
into the tank
(2)
. Shortage of water: When in shortage of
water: H2O appears on the display
(4)
.
2. Inserting the steam hose
The protective cover of the contact socket
(6)
is opened
up. Now you have to insert the plug of the steam hose
into the socket. Now, the hose is connected to the
appliance.
To remove the steam hose open the lid of the contact
socket
(6)
and pull out the hose.
3. Connection of accessories
Insert the appropriate accessory into the hose or pipe
until it locks.
To remove the accessories, press the black button and
pull out the accessory.
1.
Boiler drain cap
2.
Water Tank
3.
Main switch (device) boiler on / off
4.
Multifunctional Display
5.
Power cord winder
6.
Steam socket connection
7.
Water Tank cap
8.
Handle (Park Position)
DESCRIPTION OF THE APPLIANCE AND AN
EXPLANATION OF THE FIGURES
In case of water shortage steam output is
interrupted so that the boiler under pressure is
off and not idle.
If you needs water, remove tank cap
(7)
and fill
up the tank
(2)
with the plastic bottle.
Never pour detergents, anti-scale additives,
essences or distilled water into the tank
(2)
!
Doing so would result in serious damage to the
water circulation system and heating element.
