Förster-Technik TAP5-CH2-25, Оригинальная инструкция по эксплуатации

Страница: 38 / 131

38 Operating the automatic feeder
•
Navigate between the items of a list, for example between [yes] and [no].
You can use to:
•
Scroll screen by screen through a menu, for example to the submenus on the next page or
directly to the last menu item.
•
Scroll through a list, for example through animal numbers. At the end of the list, the mes-
sage List end appears in the display.
•
When you enter numbers, switch between whole numbers, for example from 1 to 2 to 3.
You can use to:
•
Confirm an entry.
•
Confirm a prompt or message shown on the display.
•
Confirm a selection.
•
Open menus and submenus.
•
To open input fields, which are indicated by square brackets.
•
Switch from the number before the decimal place to the number after the decimal place in
input fields.
You can use to:
•
Go back one menu each time you press the key. You return to the starting menu by pressing
this key multiple times.
•
Exit the input field or return to the number before the decimal place in an input field.
4.3.3 Menus
4.3.3.1 Animal control
You can choose to open the Animal control menu. This menu contains all the submenus
you require for daily calf monitoring. The numbers next to the submenus indicate the number
of calves recorded in the relevant submenu.
•
Animal list . A table is displayed that shows you your calves, sorted by different parameters,
such as visits to the feeding station.
•
Entitled . A list of your calves is displayed, sorted by feed entitlement.