10
DO NOT TURN
THE
O
VEN ON ITS
SIDE
1
. USING A CRANE
Once the oven is uncrated and removed from the tie down
pallet it can be lifted and placed using a crane. Rigging for
placement by a crane requ
ires the use of two sling straps to be
located directly beneath the oven base and on opposite sides.
The rigging straps can culminate to an overhead lifting bar or
hook. Each side of the rigging straps must have tension straps
to ensure that the rigging st
raps remain spread wide at their
bases during the lifting process.
2
. USING A FORKLIFT
Be sure to use a forklift rated, and forks the minimum length,
as shown in Appendix A. Fork extensions must be used so the
forks extend through to the opposite side of
the stand. The
oven is very top heavy, so be sure to spread the forks as far
apart as possible
3
. USING A PALLET JACK
Once the oven has been removed from the delivery vehicle, it
can easily be moved on flat surfaces using a pallet jack. If the
forks don’
t extend across the base, use 4” x 4” posts to bridge
the space, placing the forks underneath for support.
!
!
!
!
!
!
!
!
!
!
LIFTING THE OVEN
UNLOADING AND MOVING
Residential
Oven Series
Installation, Operation & Maintenance
Forno Classico LLC
Phone:
(805) 895
-
2626
53
Aero Camino [email protected]
Goleta, CA 93117 USA www.fornoclassico.com
