Fornelli PGA 45 FIERO BL, Руководство пользователя

Страница: 11 / 24

Installation and operation instructions Installation and operation instructions
HOBS
9
HOW TO CHOOSE A GAS BURNER
FOR FOOD PREPARATION
Symbols printed close to the control knobs
(to the left and above) of the gas burners (Fi-
gure 2) show which knob regulates a specific
gas burner.
The gas burner controlled by a specific knob
is marked with a darkened section.
To ensure decreased gas consumption and
higher efficiency of gas burners, use flat dis-
hware the size of which corresponds to that
of gas burners. Flame intensity and sizes of
dishware shall be chosen in such a way that
the flame does not reach the side walls of the
dishware. Table 1 presents recommended
use of gas burners depending upon the dis-
hware sizes.
Use the dishware with covers – this would
significantly reduce the cooking time.
Upon boiling, reduce the flame intensity so
that it can be enough to keep the food boiling
and you do not have to move or take off the
cover.
USE OF SUPPORT GRIDS
The support grids are designed to ensure ho-
rizontal and stable position of dishware abo-
ve the gas burners, for more convenient and
safer operation of hobs. Every time you use
your hob, make sure that the support grids
are stable. Always check proper positioning
of rubber end pieces beneath, take care to
ensure they are not damaged.
Table 1
Gas burner
Minimum dishware
diameter
Maximum dishware
diameter
Small-sized 60 mm or less 140 mm
Middle-sized 160 mm 200 mm
Large 200 mm 240 mm