Operating Manual
1/97
1
1. INTRODUCTION
This manual shows you how to use the
FD 150
. It presents
information about the
FD 150
’s specifications, physical
features and operation.
1.1
FD150
Description
The
FD 150
is a document imprinter used for signing,
endorsing and validating cut-sheet documents. Documents
to be imprinted are stacked in the feed tray. Two paper
guides hold the stack in position as the documents are fed
through the
FD 150
.
The stack is separated into single pieces by separators and
rolls which feed each document into the
FD 150
. A
photosensor (an electric eye) in the base of the
FD 150
,
senses the document and transmits this information to the
microprocessor which controls the
FD 150
. The micro-
processor directs a motor to rotate the saddle holder and
imprint the document at the position set on the imprint
position control. The imprinted documents then exit the
F
D
150
and stack on the receiving tray.
1.2 Items Included
The following items are shipped together in one box. Take
note of each as you unpack the box.
•
F
D
150
•
receiving tray
•
accessories carton
•
FD 150
Operating Manual
•
cloth bag (2 tray screws, 2 sets of keys and 2 knobs)
•
feed tray extension