![background image](http://html1.mh-extra.com/html/formax/atlas-c150/atlas-c150_operating-instructions-manual_2319984053.webp)
_________________________________________________________________________
53
3
List of Fault Codes
FE-101 – Misfeed
This code is displayed if the ultrasonic double sheet detector (US DSD) Q10 was not activated
in time after the start of the feed cycle. This means that the sheet has failed to exit the feeder
table area.
Actions:
•
Remove the jammed sheet (if any) from underneath the vacuum belts. If the sheet is
damaged, discard it.
•
Check the paper path for any obstructions or debris.
•
Check that the paper loaded in the feeder matches the parameters (size and thickness)
set in the UI.
•
Fan the paper stack to ensure sheets are not stuck together and there is no excessive
buildup of static electricity.
•
Check that feeder magnetic side guides do not stop the sheet from freely exiting the
feeder.
•
If frequent misfeeds keep occurring after carrying out the above actions:
o
Check that the sheet can freely pass between the separation pads and the vacuum
belts.
o
Turn off feeder AUTO settings and increase one or more of the following
parameters: paper density, vacuum fan, separation fan.
NOTE:
See the “Feeder Settings” section of this manual for instructions on how to do this.
FE-102 – Double sheet
This code is displayed when the ultrasonic double sheet detector (US DSD) Q10 has detected
two or more overlapping sheets exiting the feeder at the same time.
Actions:
•
Remove the jammed sheets from underneath the vacuum belts. If the sheets are
damaged, discard them.
•
Check the paper path for any obstructions or debris.
•
Check that the paper loaded in the feeder matches the parameters (size and thickness)
set in the UI.
•
Fan the paper stack to ensure sheets are not stuck together and there is no excessive
buildup of static electricity.
•
If frequent double feeds keep occurring after carrying out the above actions:
o
Turn off feeder AUTO settings and increase one or more of the following
parameters: paper density, vacuum fan, separation fan.
o
If using laminated paper or other multi-layered stock, switch off the US DSD.
NOTE:
See the “Feeder Settings” section of this manual for instructions on how to do this.
Содержание Atlas C150
