Formax Atlas C150, Руководство по эксплуатации, Страница: 57 / 72

_________________________________________________________________________
57
3
CR-205 – Creaser 1 home sensor Q21 not activated
To produce creases at the specified positions accurately the creaser mechanism needs to
initialize by moving to its home position. Creaser 1 position is measured by home sensor Q21.
If the creaser mechanism cannot reach its home position or if the sensor cannot detect it, the
machine will display error code CR-205.
Actions:
•
Check creaser 1 for any obstructions or debris that may stop it moving to its home
position.
•
Clean creaser 1 home sensor Q21 using the sensor cleaning brush.
NOTE:
See the “Maintaining Your Machine” section of this manual for instructions on how to clean
this sensor.
CR-206 – Creaser 2 home sensor Q22 not activated
To produce creases at the specified positions accurately the creaser mechanism needs to
initialize by moving to its home position. Creaser 2 position is measured by home sensor Q22.
If the creaser mechanism cannot reach its home position or if the sensor cannot detect it, the
machine will display error code CR-206.
Actions:
•
Check creaser 2 for any obstructions or debris that may stop it moving to its home
position.
•
Clean creaser 2 home sensor Q22 using the sensor cleaning brush.
NOTE:
See the “Maintaining Your Machine” section of this manual for instructions on how to clean
this sensor.
CR-207 – Sheet late from creaser input sensor Q20 to creaser output sensor Q25
If the sheet takes more time than expected to cover the distance between creaser input sensor
Q20 and creaser output sensor Q25, the machine displays error code CR-207. This means
that the sheet has exited the feeder and entered the creaser but has not exited the creaser in
time.
Actions:
•
Remove the jammed sheet from the creaser rollers. If the sheet is damaged, discard
it.
•
Check the paper path for any obstructions or debris.
• Check that crease tools are installed in the correct direction with the arrows pointing in
the paper movement direction.
• Check whether the height adjustable stacker is full. If it is, empty the stacker.
•
Change stacker height.
• Make sure that stacker’s side guides are not too tight.
•
Change machine speed (see “tools” section).