manualshive.com logo in svg

Ford TRANSIT 2016.75, Руководство по монтажу

Поделиться
Скачать
Ford TRANSIT 2016.75 Скачать руководство пользователя страница 28

1.12 Noise, Vibration and Harshness (NVH)

WARNING: Make sure that the modified
vehicle complies with all relevant legal
requirements.

Changes to the powertrain, engine, transmission,
exhaust, air intake system or tires may influence
the exterior noise emissions. Therefore the exterior
noise level of the converted vehicle has to be
verified.

The interior noise levels should not be deteriorated
by the conversion. Reinforce panels and structures
as appropriate to avoid vibrations. Consider the
usage of sound deadening material on panels.

FORD 

TRANSIT

 2016.75

Date of Publication: 03/2018

EU

1 G

ener

al Inf

orma

tion

28

Содержание TRANSIT 2016.75





































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды