Ford TRANSIT 2016.75, Руководство по монтажу

Страница: 252 / 292

Sub-frame Mounted on Floor
E176724
A
B
1
2
3
4
6
5
7
1
2
3
4
6
5
Description Item
Compliant Mount A
Fixed Mount B
Sub-frame Longitudinal 1
Sub-frame Outriggers 2
Floor of Vehicle 3
Fix to floor using adequate reinforcements 4
Reinforcement Bracket - Use 2x per attachment location, one each side of the rail 5
Reinforcement Bracket to Sub-frame 6
Captive Compliant Bush 7
It is recommended to design sub-frames in the
way that there is no adverse strain on the vehicle
structure. Use compliant and fixed mounts to
attach to the vehicle body. For design principle
refer to E176546.
For Van, Bus and Kombi:
•
It is recommended to fix every mount with M8
bolt grade 8.8 minimum.
•
It is not recommended to engineer through the
floor fixings to clamp around side members.
Refer to: 5.15 Frame and Body Mounting (page
281).
•
Please see figure E176546 which show the
principle of adequate fixings.
•
Very stiff sub-frames should not be rigidly
mounted to the floor, please refer to figure
E176724 for examples of a compliant mount.
Compliant bushes should allow up to +/-12mm
movement at a rate of 100kg per 1.0mm
deflection with only the rear pair of mounts
being fixed.
•
Support legs, if required, must be fitted directly
to the sub-frame.
•
Support legs must be designed to prevent any
adverse strain on the vehicle structure when
operating equipment.
FORD TRANSIT 2016.75
Date of Publication: 03/2018
EU
5 Body and P
aint
252