Ford TRANSIT 2016.75, Руководство по монтажу

Страница: 240 / 292

Recommended Second Unit Body Fixing Strategy - Single Chassis Cabs
E167671
X
1
A
A
2 3
4 5 6
Description Item
Anti Rotation Bolt - EK31-101D80-A* A
Restricted access to inner attachment hole due to fuel tank. Must use Anti Rotation Bolt 'A' 1
Inner attachment holes can be omitted. 2 and
3
Restricted access to inner attachment hole due to heat shield. Recommended to use Anti
Rotation Bolt 'A' 4
Inner attachment holes can be omitted. 5 and
6
When mounting a Second Unit Body all of the
attachment holes shown in figures E167667,
E167668, E167669, E167670 or E167674 should be
used unless specified they can be omitted.
NOTE: Some of the attachment holes are difficult
to reach or obscured by the fuel tank and can be
omitted, EXCEPT attachment hole 1 which must
be used, a special anti-rotation bolt is available -
EK31-101D80-A*. It is recommended to use this
special bolt in both the inner first positions 1 and
4, see figure E176671 'Recommended Second Unit
Body Fixing Strategy'.
NOTE: So that the bolt can be tightened from
outside the vehicle, a cut out in the lower rail of
the second unit body may be necessary for tool
access.
Fitting the Anti-rotation Bolt
•
Insert anti-rotation bolt from underneath into
hole 1 and insert the anti-rotation pin into hole
3, see figure E1766712, repeat for other side
•
Temporarily secure the bolt using the
locking/grip washer on the upper side of the
chassis rail, see item 2 in figure E176672
•
Mount the float, box body ensuring the bolt
aligns with the hole in the second unit body
•
Complete the joint by tightening the bolt, torque
55Nm
FORD TRANSIT 2016.75
Date of Publication: 03/2018
EU
5 Body and P
aint
240