Ford FG6250P, Руководство пользователя, Страница: 24 / 30

FG6250P(E) - FG7750P(E) - FG9250P(E) EN
Copyright © 2016 P a g e | 24 www.fordpowerequipment.co.uk
26 REPLACING FUEL FILTER (SEE FIG.23)
Occasionally the fuel filter may become clogged and need replacing. To purchase a replacement fuel
filter contact your supplier (see manual back) or your local small Engine repair shop.

Turn the fuel valve to the “OFF” position.

Remove the fuel line from both sides of the filter by squeezing the ends of the retaining clip with
pliers.

Slide the fuel line off.

Replace with new fuel filter.

Reinstall fuel lines to new fuel filter.

Turn the fuel valve to the “ON” position
CAUTION! Fuel tank must be empty before replacing fuel filter. Run unit until
tank is empty, if needed, or inspect filter prior to fill-up
Fig.22 Fig.23
27 DRAINING FUEL TANK AND CARBURETOR
To help prevent gum deposits in the fuel system, drain the fuel from the tank and carburetor before
storing the unit for long periods of time. This will help prevent starting problems in the future. If the
unit is stored with fuel and the fuel becomes stale or turns gummy or to varnish the warranty does
not cover this repair or service.
27.1 Draining the fuel tank

Turn the engine OFF.

Turn the fuel valve to the OFF position.

Remove the fuel line that leads to the carburetor from the petcock by squeezing the ends of the
hose clamps and

sliding the fuel line off.

If needed, install a fuel hose that will extend to a suitable fuel container large enough to catch the
fuel being drained from the tank.

Turn the fuel valve to the ON position.
When the fuel has drained from the tank, close the fuel valve and reinstall fuel line securely on
petcock.