
FG6250P(E) - FG7750P(E) - FG9250P(E)
EN
Copyright © 2016
P a g e
|
11
www.fordpowerequipment.co.uk
6
ASSEMBLY (FG6250P(E),7750P(E),FG9250P(E))
6.1
Remove Shipping Bracket (See Fig.1)
Remove and discard the RED shipping bracket and mounting hardware before starting the
Generator.
6.2
Attaching Wheels (See Fig.2)
Parts needed - 2 wheels, 2 axles, 2 hair pins, 2 washers, 2 hub caps and 2 self-tapping screws.
Raise or tilt generator so you can slide the wheel axle pin into the wheel, the washer, the wheel
mounting hole located on the side of the frame.
Secure the wheel assembly by reinserting a hair pin through hole at the end of the wheel axle
and pressing until it locks into place.
Install hub cap to the wheel until “Click”. Install self-tapping screw, until the screw is snug.
Repeat process on the other side of the generator to install the second wheel.
Fig.1
Fig.2