PRINCIPLE OF OPERATION
Cruise control lets you maintain a set
speed without keeping your foot on the
accelerator pedal. You can use cruise
control when your vehicle speed is greater
than 20 mph (30 km/h).
USING CRUISE CONTROL
WARNINGS
Do not use cruise control on winding
roads, in heavy traffic or when the
road surface is slippery. This could
result in loss of vehicle control, serious
injury or death.
When you are going downhill, your
vehicle speed may increase above
the set speed. The system will not
apply the brakes but a warning displays.
E144500
The cruise controls are on the steering
wheel.
Switching Cruise Control On
Press and release
ON
.
E71340
The indicator appears in the
instrument cluster.
Setting the Cruise Speed
1.
Drive to desired speed.
2. Press and release
SET+
.
3. Take your foot off the accelerator
pedal.
Note:
The indicator will change color.
Note:
Cruise control will disengage if the
vehicle speed decreases more than 10 mph
(16 km/h) below the set speed while driving
uphill.
Changing the Set Speed
•
Press and release
SET+
or
SET-
. When
you select km/h as the display
measurement in the Information
display the set speed changes in
approximately 2 km/h increments.
When you select mph as the display
measurement in the information
display the set speed changes in
approximately 1 mph increments.
•
Press the accelerator or brake pedal
until you reach the desired speed. Press
and release
SET+
.
•
Press and hold
SET+
or
SET-
. Release
the control when you reach the desired
speed.
Note:
If you accelerate by pressing the
accelerator pedal, the set speed will not
change. When you release the accelerator
pedal, your vehicle returns to the speed that
you previously set.
Canceling the Set Speed
Press and release
CAN
or tap the brake
pedal. The set speed does not erase.
Resuming the Set Speed
Press and release
RES
.
Switching Cruise Control Off
Press and release
OFF
when the system
is in stand by mode or switch the ignition
off.
163
Focus (CDH) Canada/United States of America, enUSA
Cruise Control