E107998
Make sure that you dispose of
old batteries in an
environmentally friendly way.
Seek advice from your local authority
about recycling old batteries.
1.
Remove the key blade from the
transmitter.
E142432
2. Twist a thin coin under the tab hidden
behind the key blade head to remove
the battery cover.
E138622
3. Remove the old battery.
4. Insert a new battery with the
+
facing
downward. Press the battery down to
make sure it is fully in the housing.
5. Reinstall the battery housing cover
onto the transmitter and install the key
blade.
Note:
Do not wipe off any grease on the
battery terminals or on the back surface of
the circuit board.
Note:
Replacing the battery does not delete
the transmitter from your vehicle. The
transmitter should operate normally.
Locating Your Vehicle
Press the lock button on the key twice
within three seconds. The horn sounds and
the direction indicators flash. We
recommend you use this method to locate
your vehicle, rather than using the panic
alarm.
The horn sounds twice and the direction
indicators do not flash if:
•
Locking was not successful.
•
Any door or the liftgate is open.
•
The hood is open on vehicles with an
anti-theft alarm or remote start.
Sounding the Panic Alarm
(If Equipped)
E138624
Press the button to activate the
alarm. Press the button again or
switch the ignition on to
deactivate it.
Note:
The panic alarm only operates when
the ignition is off.
Remote Start
WARNING
To prevent drawing exhaust fumes
into your vehicle, do not use remote
start if your vehicle is parked indoors
or areas that are not well ventilated.
E138625
The remote start button is on the
transmitter.
This feature allows you to start your
vehicle from the outside. The transmitter
has an extended operating range.
55
Focus (CDH) Canada/United States of America, enUSA
Keys and Remote Controls