Changing the Set Speed
Note:
If you accelerate by pressing the accelerator pedal, the set speed
will not change. When you release the accelerator pedal, you will return
to the speed that you previously set.
•
Press
SET
up or down and hold to increase or decrease the set speed.
Release the control when you reach the desired speed.
•
Press
SET
up or down and release. The set speed will change in
approximately 1 mph (2 km/h) increments.
•
Press the accelerator pedal or brake pedal until you reach the desired
speed. Press
SET
up and release.
Canceling the Set Speed
Press
CNCL
or tap the brake pedal. The set speed will not be erased.
Resuming the Set Speed
Press and release
RES
.
Switching Cruise Control Off
Note:
The set speed is erased when you switch off cruise control.
Press the
OFF
control down and release or turn off the ignition.
USING ADAPTIVE CRUISE CONTROL (IF EQUIPPED)
WARNING:
Always pay close attention to changing road
conditions, especially when using adaptive cruise control.
Adaptive cruise control cannot replace attentive driving. Failing to
follow any of the warnings below or failing to pay attention to the road
may result in a collision, serious injury or death.
WARNING:
Adaptive cruise control is not a collision warning or
avoidance system. Additionally, adaptive cruise control will not
detect:
•
stationary or slow moving vehicles below 6 mph (10 km/h)
•
pedestrians or objects in the roadway
•
oncoming vehicles in the same lane.
WARNING:
Do not use the adaptive cruise control when
entering or leaving a highway, in heavy traffic or on roads that
are winding, slippery or unpaved.
240
Cruise Control
2015 Explorer
(exp)
Owners Guide gf, 2nd Printing, September 2014
USA
(fus)