Upshift to the recommended shift speeds according to the following
chart.
Upshifts when accelerating (recommended for best fuel economy)
Shift from:
1 - 2
15 mph (24 km/h)
2 - 3
25 mph (40 km/h)
3 - 4
40 mph (64 km/h)
4 - 5
45 mph (72 km/h)
5 - 6
50 mph (80 km/h)
The information display in the instrument cluster will show the current
selected gear you are in.
In order to prevent the engine from running at too low an RPM, which
may cause it to stall, SelectShift will automatically make some downshifts
even if it has determined that you have not downshifted in time.
Although the SelectShift will make some downshifts for you, it will still
allow you to downshift at any time as long as the SelectShift determines
that the engine will not be damaged from over-revving.
Note:
Engine damage may occur if excessive engine revving is held
without shifting.
Brake-shift interlock
WARNING:
Do not drive your vehicle until you verify that the
brakelamps are working.
WARNING:
When doing this procedure, you will be taking the
vehicle out of park which means the vehicle can roll freely. To
avoid unwanted vehicle movement, always fully set the parking brake
prior to doing this procedure. Use wheel chocks if appropriate.
WARNING:
If the parking brake is fully released, but the brake
warning lamp remains illuminated, the brakes may not be
working properly. See your authorized dealer.
Use the BSI lever to move the gearshift lever from the park position in the
event of an electrical malfunction or if your vehicle has a dead battery.
Transmission
209
2015 Explorer
(exp)
Owners Guide gf, 2nd Printing, September 2014
USA
(fus)