Yes
REPAIR Circuit 1321 (TN/BK). REPEAT the FEM self-test, CLEAR the DTCs.
No
INSTALL a new FEM. For additional information, REFER to
Section 419-10
. REPEAT the FEM self-test, CLEAR
the DTCs.
F4
CHECK THE MULTIFUNCTION SWITCH
Multifunction Switch C263
Check the multifunction switch for correct operation. Refer to Wiring Diagram Cell 149.
Is the multifunction switch OK?
Yes
GO to
F5
.
No
INSTALL a new multifunction switch. For additional information, REFER to
Section 211-05
. REPEAT the FEM self-
test, CLEAR the DTCs.
F5
CHECK CIRCUIT 65 (DG) FOR VOLTAGE
Front Washer Pump C119
Measure the voltage between front washer C119 Pin 1, Circuit 65 (DG), harness side and ground.
Is the voltage greater than 10 volts?
Yes
GO to
F6
.
No
REPAIR Circuit 65 (DG). REPEAT the FEM self-test, CLEAR the DTCs.
F6
CHECK CIRCUIT 1321 (TN/BK) FOR OPEN
FEM C191
Measure the resistance between FEM C191 Pin 14, Circuit 1321 (TN/BK), harness side and front washer pump
C119 Pin 2, Circuit 1321 (TN/BK), harness side.
Is the resistance less than 5 ohms?
Yes
GO to
F7
.
No
REPAIR Circuit 1321 (TN/BK). REPEAT the FEM self-test, CLEAR the DTCs.
F7
CHECK FRONT WASHER PUMP
Front Washer Pump C119
Connect a fused (5A) jumper wire between FEM C191 Pin 14, Circuit 1321 (TN/BK), harness side and ground.
Page 21 of 30
2000 Windstar Workshop Manual
4/1/2010
http://www.fordtechservice.dealerconnection.com/pubs/content/~WSYW/~MUS~LEN/21/S...
