Measure the voltage between BJB Fuse 8 (25A) input side and ground.
Is the voltage greater than 10 volts?
Yes
REINSTALL BJB Fuse 8. GO to
C12
.
No
REPAIR the BJB. REPEAT the FEM self-test, CLEAR the DTCs.
C12
CHECK THE REAR WIPER RELAY FOR CORRECT OPERATION
Rear Wiper Relay
Check the rear wiper relay for correct operation. Refer to Wiring Diagram Cell 149.
Is the rear wiper relay OK?
Yes
GO to
C13
.
No
INSTALL a new rear wiper relay. REPEAT the FEM self-test, CLEAR the DTCs.
C13
CHECK CIRCUIT 406 (BN/WH) FOR OPEN
Measure the voltage between rear wiper relay Pin 5, Circuit 406 (BN/WH), harness side and ground.
Is the voltage greater than 10 volts?
Yes
GO to
C14
.
No
REPAIR Circuit 406 (BN/WH). REPEAT the FEM self-test, CLEAR the DTCs.
C14
CHECK CIRCUIT 406 (BN/WH) FOR OPEN
Rear Wiper Motor C904
Measure the voltage between rear wiper motor C904 Pin 1, Circuit 406 (BN/WH), harness side and ground.
Is the voltage greater than 10 volts?
Yes
GO to
C15
.
No
Page 15 of 30
2000 Windstar Workshop Manual
4/1/2010
http://www.fordtechservice.dealerconnection.com/pubs/content/~WSYW/~MUS~LEN/21/S...
