Forch 5326 115, Руководство пользователя

Страница: 14 / 64

14
E N G L I S H
Weighted root mean square acceleration value
according to EN 50144:
< 2.5 m/s 2
Prokurist
Produkt-Marketing
Bernd Stumpf
Theo Förch GmbH, D-74196 Neuenstadt,
Deutschland
Safety instructions
When using power tools, always observe
the safety regulations applicable in your
country to reduce the risk of fire, electric
shock and personal injury.
Read all of this manual carefully before
operating the tool.
Save this manual for future reference.
General
1 Keep work area clean
Cluttered areas and benches can cause
accidents.
2 Consider work area environment
Do not expose the tool to rain. Do not use the tool
in damp or wet conditions. Keep the work area
well lit (250 - 300 Lux). Do not use the tool
where there is a risk of causing fire or
explosion, e.g. in the presence of flammable
liquids and gases.
3 Keep children away
Do not allow children, visitors or animals to
come near the work area or to touch the tool
or the mains cable.
4 Dress properly
Do not wear loose clothing or jewellery, as
these can be caught in moving parts. Wear
protective hair covering to keep long hair out
of the way. When working outdoors,
preferably wear suitable gloves and non-slip
footwear.
5 Personal protection
Always use safety glasses. Use a face or dust
mask whenever the operations may produce
dust or flying particles. If these particles might
be considerably hot, also wear a heat-resistant
apron. Wear ear protection at all times.
6 Guard against electric shock
Prevent body contact with earthed surfaces
(e.g. pipes, radiators, cookers and
refrigerators). When using the tool under
extreme conditions (e.g. high humidity, when
metal swarf is being produced, etc.), electric
safety can be improved by inserting an isolating
transformer or a (FI) earth-leakage circuit-
breaker.
7 Do not overreach
Keep proper footing and balance at all times.
8 Stay alert
Watch what you are doing. Use common sense.
Do not operate the tool when you are tired.
9 Secure workpiece
Use clamps or a vice to hold the workpiece. It
is safer and it frees both hands to operate the
tool.
10 Connect dust extraction equipment
If devices are provided for the connection of
dust extraction and collection facilities, ensure
that these are connected and properly used.
11 Remove adjusting keys and wrenches
Always check that adjusting keys and
wrenches are removed from the tool before
operating the tool.
12 Extension cables
Before use, inspect the extension cable and
replace if damaged. When using the tool
outdoors, only use extension cables intended
for outdoor use and marked accordingly.
13 Use appropriate tool
The intended use is described in this
instruction manual. Do not force small tools or
attachments to do the job of a heavy-duty tool.
The tool will do the job better and safer at the
rate for which it was intended. Do not force
the tool.
Warning! The use of any accessory or
attachment or performance of any operation
with this tool other than those recommended in
this instruction manual may present a risk of
personalinjury.