FOR-A LTR-200HS7, Руководство по эксплуатации

Страница: 85 / 93

85
7-2. Playback
Details of restrictions Related
section no.
Cache erase operations cannot be performed for an open file that is playing back.
To perform cache erase, switch the mode from playback to recording, and close
the file. 4-3-1
For the playback of MXF files, basically only files created on the LTR recorder are
supported. But the customers can consult us on this matter.
When playing back MXF files at variable speeds (faster or slower than normal
speed), the Player may stop while displaying a frozen video. In this case, close and
re-open the file, then play the file again. This phenomenon will be improved in
future versions.
When playing back MXF files at variable speeds (faster or slower than normal
speed), the top or last frame may
not play back in some cases.
The preview screen, built-in speaker and headphone out are provided only for
monitoring use and to ensure easy operation. To precisely check the audio and
video quality, use appropriate devices by connecting them to the rear of the unit.
On rare occasions, the sound heard through headphones or speakers may skip.
This does not affect the SDI or AES sound.
Although this is a characteristic of LTO tapes, in some cases, the tape drive may
rewind tapes to read them. The tape cartridge may automatically eject and
immediately reinsert into the drive during writing retries. In such case, the process
may take several minutes. Or playback may continue until the end of the cached
data and stop due to the caching.
Do not change write protect On/Off switches while LTO tapes are inserted in the
LTR recorder. Doing so may cause significant errors in some cases, such as failed
playback or missing recorded file.
Be sure to eject LTO tapes from the LTR recorder before changing the write protect
switch status.
Turning the jog dial slowly may make the dial inactive once every approximately
50 to 100 frames. 3-2
5-1-6
In some cases, the "REV" may not rewind tapes back to the top position but to the
position that is two-frames advanced. 3-2, 5-1-4
In some cases, normal playback may advance audio or time code by one frame.
No audio is output for MPEG-2 MXF files played at 3x or 4x speed in reverse or 4x
speed in the forward direction.
7-3. Miscellaneous
Details of restrictions Related
section no.
When a setting
other than “Free run”
has been selected for the Reference input
format, MXF files with a frequency different from the genlock frequency are
unable to be opened. If an attempt is made to open such a file, a warning is
displayed, and the file will not be opened.
If “
Free run
” has been set, MXF files can be opened regardless of the frequency.
4-7-3
“192.168.255.xxx” cannot be set as the IP address. If an attempt is made to set
the address, an error message is displayed.
4-10-3