53
4-10-3. Interface and System Setting Menu Screen
The archive system input and output settings
are set using this menu. When “
Setup interface
and system
” is selected in the
Maintenance
screen, a screen such as the one shown on the
right appears.
Use the [
] and [
] buttons or the jog dial to select the items, and use the [
ENTER
] or [
PLAY
]
button to enter settings. When the [
MENU
] button is pressed, operation returns to the
Maintenance
screen.
Item
Description
Change IP address
Sets
the IP address. For details, refer to “Change IP Address” below.
GPI settings
Establishes
GPI settings. For details, refer to “GPI Settings” in the
following pages.
Change date & time
Sets the LTR recorder date and time.
For details, refer to “Change
Date & Time” in the following pages.
Firmware update
Updates the internal firmware. This item is not normally used.
For details on the update method, refer to the documentation provided
with the module to be updated.
FTP Settings
Changes the password for FTP access.
For details, refer to “FTP Settings” in the following pages.
VTR control settings
Sets the VTR control for recording.
For details, refer to “VTR Control
Settings
” in the following pages.
Network output
settings
Specifies a network storage location for output recording files. For
detai
ls, refer to “Network Output Settings” in the following pages.
Cache mode settings
Sets the cache mode settings.
