FOR-A LTR-200HS7, Руководство по эксплуатации, Страница: 36 / 93

36
Item Description
Write on LTO
tape at ingest
time Selects the type of writing.
YES Writes content to a cache file on the internal hard disk and to
an LTO tape during recording. The cached file is automatically
deleted when the LTO tape is unmounted after finishing the
recording.
The usage rate shown in the
Monitoring screen (5-1-3 (3))
includes the used space in the LTO tape and the total size of
listed files, highlighted in blue, in the file list.
NO Writes content to a cache file on the internal hard disk but not
to an LTO tape during recording. Content is able to be written
to an LTO tape from the cached file later. (Refer to "Copy to
tape" in "4-3-1. File Operation screen".)
Recording will automatically stop if the total size of all files
written to the internal hard disk drive exceeds the free space in
the LTO tape.
The usage rate shown in the
Monitoring screen (5-1-3 (3))
includes the used space in the LTO tape and the total size of
listed files as blue back-ground in the file list, highlighted in
blue, in the file list.
YES+1copy Writes content to a cache file on the internal hard disk and to
an LTO tape during recording.
The cached file is not automatically deleted when the LTO
tape is unmounted after finishing recording.
The cache file data can be copied to other LTO tapes.
Recording will automatically stop if the total size of all files
written to the internal hard disk drive exceeds the free space in
the LTO tape.
The usage rate shown in the
Monitoring screen (5-1-3 (3))
indicates the amount of used space in the LTO tape.
Max writable
space
(*1)
80%, 85%
90%, 95%,
99%, 100% Sets the free space limit (percentage) on LTO tapes.
If the amount of used space on a tape exceeds the limit during a
recording, the recording automatically stops.
*1 Writing retries may occur depending on LTO tape or head conditions and reduce the amount of available
free space on tapes. Tape data, therefore, may in some cases be unable to be copied due to space
restrictions caused by retries. To use auto-copy functions, set the maximum amount of tape cartridge
usage to less than 90%.