68
5-1-3. Monitoring Screen
In the
Monitoring
screen, the preview images, audio level meter, time code, lap time,
recording parameters (bit rate, resolution, frame rate, number of audio channels and number
of audio bits), recording filenames, IN and OUT point TCs and DURATION are displayed.
No.
Item
In Playback mode
In Recording mode
(1)
Preview images
(
*
1)
Playback images or black tint
are output as preview images
and concurrently output to the
rear panel SDI output.
Rear panel input SDI images are
displayed and concurrently output to
the rear panel SDI output.
(2)
Audio level
meter
Eight-channel audio peak level meter.
The “Normal” or “Fine” setting
can be selected using the AUDIO switch. If the Audio switch is set to
“Fine”, the center of the
Audio reference level
can be selected from
-20dB, -18dB and -16dB. (For details, refer to "4-7-3. System Settings
Screen".)
If the Audio switch is set to “Normal”, the 0 dB to -50 dB range is
displayed; at the “Fine” setting, the -20 dB ±3 dB range is displayed. At
“Normal”, levels under -13.6 dB are indicated in green, levels of -13.6
dB up to -6.5 dB are indicated in yellow, and levels above -6.5 dB are
indicated in red.
(3)
Playback
position display
A green horizontal progress bar appears in the
upper row, representing the points from which
video can be played back, and changes in
relation to the copied volume of data from the
LTO tape onto the cache internal hard disk.
When starting playback, a white bar will appear,
which indicates the current position in the video.
A numeric time display right next to the bar
represents the size of cached data.
The bottom row is used to indicate the size of
cached data. The total duration of the file is
indicated numerically right next to the bar.
A “Used:X%”
description
indicates the total
percentage of
space used in the
LTO tape and
internal disk drive
(total size of blue
colored files in the
file list).
(4)
Cartridge serial
number
Displays the serial number of mounted LTO tape cartridge.
(5)
Media ID display Displays the media ID written as metadata on the mounted LTO tape.
*1 A 16:9 aspect ratio serves as the display size so when 4:3 images are displayed, they appear in the
center.
(Continued on next page)
Left: playback mode; right: recording mode
(3)
(8)
(2)
(9)
(1)
(2)
(9)
(3)
(4)
(5)
(6)
(7)
(4)
(5)
(6)
(7)
