36
4-2-8. Video Clip
Item
Default
Setting range
Description
FS
FS1
FS1-10
Allows you to select an FS for which to adjust settings.
FS Link
-
FS1-10
Allows FS settings to be simultaneously adjusted.
Designate a base FS from those selected under FS
Link > FS. All other FS settings are adjusted in the
same increments as those of the base FS.
Clip Mode
*1
Clip OFF
Clip OFF
YPbPr Clip
RGB Clip
Selects a mode whether to clip signals in the
YPbPr
color space or
RGB
color space.
*1
With 4K Mode enabled (see Section 4-2
. “Video Block”), all 4 FS settings under the same FS group
(FS3-6 or FS7-10) are linked.
IMPORTANT
In Link mode, the amount adjusted for the FS selected under FS will be applied to
other FSs. The resulting setting values of Linked FSs may differ. If the adjusted value
exceeds the upper/lower limit, the resulting setting value will be clipped at the limit. If
the FS selected under FS is not selected under FS Link, Link mode settings are
ineffective. See Section 4-2-6-1.
“Link Mode Setting Example” for further information
on Link mode settings.
YPbPr Clip
Item
Default
Setting range
(Steps)
Description
Y White
(Y White Clip)
109.0%
50.0 - 109.0%
(0.5%)
Sets the Y signal upper threshold.
Y Black
(Y Black Clip)
-7.5%
-7.5 - 50.0%
(0.5%)
Sets the Y signal lower threshold.
Chroma
(YPbPr Chroma Clip)
111.0%
50.0 - 111.0%
(0.5%)
Sets both the upper and lower thresholds
of PbPr signals.
Unity (button)
-
-
Allows you to reset the settings to default.
With 4K Mode enabled (see Section 4-2
. “Video Block”), all 4 FS settings under the same FS group (FS3-6
or FS7-10) are linked.
