Fondital TAHITI CONDENSING IST 03 C 298 - 02, Инструкция по эксплуатации

Страница: 3 / 44

3
General information for fitters, maintenance technicians and users
This INSTRUCTION MANUAL, which is an integral and indispensable part of the product, must be handed over to the user by
the installer and must be kept in a safe place for future reference. The manual must accompany the boiler should it be sold or its
possession transferred. Following to the boiler installation, the fitter is to advise the user about boiler operation and its safety
devices.
This boiler is designed for connection to a central heating system and to a hot domestic water system.
Any other use shall be considered incorrect and therefore dangerous.
The boiler must be installed by qualified personnel, in compliance with applicable laws and standards and according to the
manufacturer’s instructions given in this manual. Incorrect installation may cause injury to persons and/or animals and damage to
property. The manufacturer shall not be held liable for any such injury and/or damage.
Damage and/or injury caused by incorrect installation or use and/or damage and/or injury due to non-observance of the
manufacturer’s instructions shall relieve the manufacturer from any and all contractual and extra-contractual liability.
Before installing the boiler, check that the technical data correspond to the requirements for its correct use in the system.
Check that the boiler is intact and it has not been damaged during transport and handling: do not install equipment which is
damaged and/or faulty.
Do not obstruct the air suction openings.
Only manufacturer approved and supplied accessories or optional kits (including electric ones) are to be installed.
Properly dispose of the packaging as all the materials can be recycled. The packaging must therefore be sent to specific waste
management sites.
Keep the packaging out of the reach of children as it may represent a source hazard.
In the event of failure and/or faulty functioning, switch off the boiler. Do not attempt to make repairs: contact qualified technicians.
Manufacturer approved and supplied parts must be used for all repairs to the boiler.
Non-observance of the above requirements may affect the safety of the boilers and endanger people, animals and property.
The manufacturer, in order to guarantee efficient and correct functioning of the equipment, recommends the boiler to be serviced
and repaired by an authorized Service Centre which is best trained for the purpose.
Routine boiler maintenance should be performed according to the schedule in the relevant section of this
manual. Appropriate boiler maintenance ensures efficient operation, preservation of the environment, and
safety for people, animals and property. Incorrect and irregular maintenance can be a source of danger for
people, animals and property.
In the event of long periods of inactivity of the boiler, disconnect it from power mains and close the gas tap.
Warning! When power mains are disconnected, boiler electronic anti-frost function will not be operative.
Should there be a risk of freezing, add anti-frost: it is not advisable to empty the system as this may result in damage; use specific
anti-frost products suitable for multi-metal heating systems.
IMPORTANT
Should you smell gas:
- do not turn on or off electric switches and do not turn on electric appliances;
- do not ignite flames and do not smoke;
- close the main gas tap;
- open doors and windows;
- contact a Service Centre, a qualified installer or the gas supply company.
Never use flames to detect gas leaks.
The boiler is designed for installation in the country indicated on the technical data plate: installation in any
other country may be source of danger for people, animals and objects.
The Manufacturer cannot be held contractually or extra-contractually liable in the event of failure to comply with the above.