Fondital MADEIRA SOLAR KRBS 12, Инструкция по установке, эксплуатации и обслуживанию

Страница: 20 / 96

20
Instructions for the user
1.10 Heating and water heater programme mode
To access zone 1 heating programme displaying or editing, press button twice.
1. The display shows zone 1 symbol lashing, sun or moon symbols, bars on or of, respectively , at 00:00.Clock lights
display the programming connected to day 1 (Monday) and 00:00 bar is lashing.
2. Press
OK
to access zone programming function."PROG" wording starts lashing together with number 1 (Monday).
3. The required day can be selected by pressing CH +/- buttons.
4. Press
OK
to select the desired day.
5. Now you can associate the day/night level to the desired time of the day.
6. Whenever / button is pressed, the sun and moon symbols are alternatively activated (sun = day level; moon
= night level).
7. At the same time, close to the current time (lashing bar) clock bar comes on if the icon is on, and turns of the
icon is of.
8. Current time is indicated by both the clock and the lashing bar.
9. Press CH +/- buttons to move inside the diferent times of the day.
10. To program other days of the week or to program zone 2 and water heater, press .
11. You will go back to the starting page.
Whatever part of the programme can be quit by pressing the button twice.
The procedure to program zone 2 and water heater, is very similar to the one followed to program zone 1.
Press the "prog" button to access, in sequence, to the following 4 programmes: manual; zone 1; zone 2; water heater.
If ambient probes are connected, the "day temperature" and the "night temperature" levels will acquire the temperature value, and heating
will be active until the temperature measured by the ambient probe reaches the preset value for the diferent time slots.
When no ambient probe is connected, the two day/night levels will acquire the on and of values.
Heating is ON in the selected periods with the
icon, while it is OFF in the selected periods with the icon.
In case of connection with "Open Therm" Remote Control, that zone shall not be managed by boiler boards, as it will be directly managed by
the remote control and, as a consequence, zone programming will be inhibited.
PDF Compressor Pro