Fondital KR 55, Инструкция по установке и использованию

Страница: 32 / 44

32
fig. 20
The curves shown above, which refer to an ambient temperature of 20°C, are always limited by the maximum and minimum values of the
operating range. If a fictitiuos ambient temperature other than 20°C is requested (on knob 4), all the curves shift accordingly.
fig. 19
In addition, the position of the thermoregulation trimmer determines the CH operating range, according to the following values.
The fictitious ambient temperature is set on knob 4 (Fig. 1), which loses its CH temperature control function (§ 1.4.7.) and the setting can
be read from parameter TSP6 on the remote control (if used).
TSP5 parameter values which select the reduced range
Coefficients corresponding to thermoregulation curves
0 ÷ 75
0,0 ÷ 0,8
TSP5 parameter values which select the standard range
Coefficients corresponding to thermoregulation curves
76 ÷ 255
1,0 ÷ 3,0