Foma P905i, Руководство пользователя

Страница: 74 / 140

72
V
o
ice/
Vi
d
e
op
ho
ne Call
s
2
Select an image.
Pre-installed . . .For sending a pre-installed still image to
the other party.
Original . . . . . .For sending an appropriate message
with a still image stored using “Set
display”.
Chara-den . . . .For sending a Chara-den image selected
by “Substitute image”. (See page 69)
(Displayed only when “Substitute image”
has been selected in step 1.)
p Press
l
( ) to play back a demo to check the
still image or Chara-den image.
p To change the setting of “Original” or “Chara-den”,
press
i
( ), select “Change setting”, then select
a still image or Chara-den image. If you have selected
“Original”, select a still image after selecting a folder.
See “Set display” for settable still images.
You can set an image to be sent to the other party for
making a videophone call.
1
Enter a phone number
or
bring up the detailed display of a
Phonebook entry, redial item, dialed call
record, or received call record.
2
i
( ) Select image
Me or Chara-den
p
The setting is completed when you select “Me”.
p To cancel the setting by call, select “Release”. The
setting is completed.
3
Select a Chara-den image.
If a videophone call cannot be connected, it will be
automatically redialed as a voice call.
1
m
Settings Videophone
Voice call auto redial ON or OFF
Information
p Even if you delete the still image selected from “Original”,
that still image is displayed to the other party. To change,
set by “Change setting” or “Set display”.
Set by Call
Voice Call Auto Redial
Redialing as a Voice Call when a
Videophone Call cannot be Connected
< >
Information
p The charges for calls once switched to voice calls are billed
at the rates for the voice calls.
You can let the other party know that your FOMA phone
can switch between a voice call and videophone call.
This function is set to “Indication ON” at the time of
contract. When “Notify switchable mode” is set to
“Indication ON”, the caller can switch between the
videophone call and voice call.
p
You cannot operate “Notify switchable mode” when you are
out of the service area or radio waves do not reach, or during
a call.
1
m
Settings Videophone
Notify switchable mode
Do the following operations.
1
m
Settings Incoming call
V-phone while packet Select an item.
V-phone priority
. . .Shows the Videophone Call Receiving display. When
you answer the videophone call, packet
communication is disconnected.
Packet downld priority
. . .Rejects the videophone call and continues the
communication.
V-phone answerphone
. . .Connects the incoming videophone call to the Voice
Mail Service Center.
Call forwarding
. . .Forwards the incoming videophone call to the
forwarding destination.
p Voice Call Auto Redial does not work when a videophone
call cannot be connected such as when the line is busy or
the other party’s phone is in Public Mode (Drive Mode).
However, Voice Call Auto Redial works when you make a
videophone call to a phone that does not support the
videophone function.
Notify Switchable Mode
Setting for Switching between a
Voice Call and a Videophone Call
Information
< >
Item Operation/Explanation
Indication ON YES OK
Indication
OFF
YES OK
Check
indication
You can check the setting of the function.
Videophone while Packet
Selecting Response to Incoming
Videophone Calls during i-mode
< >