Foma P905i, Руководство пользователя

Страница: 48 / 140

46
Before Using the
Handset
3
Set your Terminal Security Code.
You can set your Terminal Security Code required for setting functions. (See page 118)
1. Enter “0000” Enter your new Terminal Security Code (four to eight digits) YES
4
Set Keypad Sound.
You can set the keypad whether to make a sound. (See page 101)
1. ON or OFF
5
Set Location Request Menu.
You can set whether to notify your current location for when a GPS location provision request arrives. (See page 240)
6
Set the size of characters.
You can set the size of characters on the display at a time. (See page 115)
You can select whether to correct the time automatically or set it manually. The time is set/displayed on the
24-hour basis.
1
m
Settings Clock Set time Auto time adjust ON or Auto time adjust OFF
Auto time adjust ON . . . . Corrects the date/time automatically. The setting is completed.
If the time is not automatically corrected such as when “ ” is displayed and the date/time has not
been set, the display for manually correcting the time appears. Follow step 2 to set the date/time.
Auto time adjust OFF . . . Sets the date/time manually.
p
When “Notice call cost” is set to “ON”, you need to enter your Terminal Security Code.
2
Enter year, month, date and time.
Use
M o
to move the cursor and enter numbers by the numeric keys.
p
To enter one-digit numeral for the date and time, enter two digits beginning with “0” as in “01”
through “09”.
p Highlight “time zone” and press
l
( ), to set the time zone. Use
M o
to select a region
and press
O o
( ).
Information
p When an unset function is found, the Initial Setting display for an unset function appears each time you turn on the power.
p
The completed settings are valid even when total setting is interrupted by an incoming call or canceled by pressing
- h
or
- r
midway.
p
When the power is automatically turned on by alarm notification, the Initial Setting display does not appear even if there is any
unset function.
p
When you finish the initial setting, the confirmation display appears telling that updating software is executed automatically.
This display appears only at the first time, and after that, does not appear until you execute Reset Settings or Initialize.
+ m - 3 - 1
Set Time
Setting Date and Time
< >
■ About date/time correction function
The time displayed on the FOMA phone is corrected according to the clock information obtained from the network.
The time is corrected when you show the Stand-by display with “Auto time adjust ON” set. If you want to set the time with a lag,
set the time manually.
p Some few second errors might occur. You might not be able to correct the time depending on the radio wave conditions, or the
i-
α
ppli program set for the i-
α
ppli Stand-by display.
p When you receive the clock information overseas and the time difference correction information differs from the previously
received one, “Time is adjusted” is displayed and the time difference is corrected automatically. Press “OK” to update the time
and show Redial, Dialed Calls, Received Calls, sent/received mail messages and others in local time.
p When the time difference is corrected overseas, the sub clock (Japanese date/time, etc.) is displayed below the clock on the
Stand-by display.
p
Depending on the networks overseas, the time difference might not be corrected.